Industrial Surface Temperature Sensorfor monitoring the surface of pipes and cables
for monitoring the surface of pipes and cables
Some of our customers:
key sensor features
Industrial sensor designed to be attached to a cable or pipe and monitor its temperature.
- measures surface temperatures from -55°C to +125°C
- resolution: 0.1°C
- with a ±0.5°C accuracy in the range -10°C to +85°C.
- plastic enclosure for safety.
- attached to cable via zip tie or hose clamp.
- 2m/6ft sensor cable to sensor enclosure.
- compact plug & play sensor.
- designed for indoor use.
- industrial grade.
- plugs into the base unit.
- powered by the base unit.
- wired or optionally wireless.
- alerts via SNMP Traps, email or SMS.
- integrates over IP using Modbus TCP, SNMP, XML, JSON with other systems.
- integrates over RS-485 using Modbus RTU with ICS. Requires optional add-on.
- measures surface temperatures from -55°C to +125°C- resolution: 0.1°C
- with a ±0.5°C accuracy in the range -10°C to +85°C.
- plastic enclosure for safety.
- attached to cable via zip tie or hose clamp.
- 2m/6ft sensor cable to sensor enclosure.
- compact plug & play sensor.
- designed for indoor use.
- industrial grade.
- plugs into the base unit.
- powered by the base unit.
- wired or optionally wireless.
- alerts via SNMP Traps, email or SMS.
- integrates over IP using Modbus TCP, SNMP, XML, JSON with other systems.
- integrates over RS-485 using Modbus RTU with ICS. Requires optional add-on.
No PC or Software Required
The InfraSensing sensors connect to the base unit (BASE-WIRED). The base unit is a standalone device that has its own IP address in your network. On its own it will monitor the sensor and trigger alerts via email, SNMP or optional SMS when needed.
There is no software or PC required for the sensors to run.
With our optional Monitoring Software you can centrally monitor sensors with trending and more. This is optional and not required.
Power cable temperature monitoring
Detect thermal changes on your power cables with this surface temperature sensor.
Using zip ties, the sensor is attached to the power cable and immediately starts monitoring the temperature of the power cable.
No configuration required; just plug and play.
Using zip ties, the sensor is attached to the power cable and immediately starts monitoring the temperature of the power cable.
No configuration required; just plug and play.
Monitor the temperature of pipes
Using zip ties or hose clamps the sensor can be attached to pipes to monitor the temperature of the surface of the pipes.
It can monitor the temperature of pipes in a wide range from -55°C to +125°C with a ±0.5°C accuracy in the range -10°C to +85°C
It can monitor the temperature of pipes in a wide range from -55°C to +125°C with a ±0.5°C accuracy in the range -10°C to +85°C