Sensor locating where along its cable water has been detected within a 15cm (6 inch) range. Ideal for detecting leaks in mission critical facilities like data centers, power rooms, ..... Don't need the location of the leak but just to know if there is water? Then check out our Leak sensor
Download our Leak Sensing guide
Download our Leak Sensing guide
Industrial Water Leak Location Sensor
key sensor features
- detects leaks along its cable with an accuracy of up to 1m/3ft.- 5m/17ft reusable water sensitive cable.
- expandable up to 125m/410ft per sensor.
- triggers an alert when water touches cable.
- IP68 housing: just put it anywhere under your raised floor and let it monitor for you.
- compact plug & play sensor.
- designed for indoor use.
- steel enclosure.
- industrial grade.
- 0u rack, DIN rail or wall mountable sensor.
- plugs into the base unit.
- powered by the base unit.
- alerts via SNMP Traps, email or SMS.
- wired or optionally wireless.
- integrates via Modbus TCP, SNMP, JSON with other systems.
No PC or Software Required
The InfraSensing sensors connect to the base unit (BASE-WIRED). The base unit is a standalone device that has its own IP address in your network. On its own it will monitor the sensor and trigger alerts via email, SNMP or optional SMS when needed.
There is no software or PC required for the sensors to run.
With our optional Monitoring Software you can centrally monitor sensors with trending and more. This is optional and not required.
Some of our customers:
US Made Leak Detection Cables.
Our water leak detection sensing cables are proudly manufactured in the USA.
The sensing cables are mechanically strong and resistant to corrosion and abrasion.
Durable. Reusable. Industrial grade. Protecting your infrastructure & facilities.
The sensing cables are mechanically strong and resistant to corrosion and abrasion.
Durable. Reusable. Industrial grade. Protecting your infrastructure & facilities.
How it works.
Haven't checked out the above video? Following illustration will show you how our water leak detection system works.
The flooding sensor connects to a base unit using a standard RJ45 network cable. The network cable tranmits data and power from the base unit to the water sensor. The sensor comes with a 5m/17ft reusable water sensitive cable. The cable can be daisy chained up to 102m/330ft. The cable is constructed of two sensing wires, an alarm signal wire, and a continuity wire embedded in a fluoropolymer carrier rod. The sensor constantly monitors the sensing cable for continuity.
Leak cable installation guide
Wondering how to setup the leak sensor or where to put the cables? We've compiled a quick guide that outlines
the do's and don'ts for leak sensing cables.
Download guide
Download guide
Customize your sensor: color / enclosure / logo
custom color & logo
Not a fan of orange? Want the sensors to match the color of your mission critical infrastructure equipment? Want to reflect your corporate color? Want to feature your own logo?
custom enclosure
Need the sensors in a custom enclosure to fit your application? Together with our partners, we can help to design special enclosures to meet your requirements.
RS485 (Modbus RTU) version
Looking to integrate this sensor with your own gateway or control system?
This now possible with the RS-485 version of this product. It has the same specs as the normal sensor with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input
This now possible with the RS-485 version of this product. It has the same specs as the normal sensor with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input