IP68 Ultrasonic Fuel Tank Level Sensor
key sensor features
- Plug & Play
- Contactless (ultrasonic) fuel level measurement
- Measures fuel level inside tanks with depths of up to 2m (6.5ft)
- with wall thickness of up to 6mm.
- IP68 rates for outdoor use
- Calibrated in factory based on specs of your tank
- In operating temperatures of 4°C to 65°C (39F to 148F)
- ISO 884 6ignition protected
- Fire Resistance tested to ABYC, US Coast guard and ISO 10088
- wired or optionally wireless.
Combined with the base unit it is a stand-alon solution to monitor the fuel levels in your tanks.
- Contactless (ultrasonic) fuel level measurement
- Measures fuel level inside tanks with depths of up to 2m (6.5ft)
- with wall thickness of up to 6mm.
- IP68 rates for outdoor use
- Calibrated in factory based on specs of your tank
- In operating temperatures of 4°C to 65°C (39F to 148F)
- ISO 884 6ignition protected
- Fire Resistance tested to ABYC, US Coast guard and ISO 10088
- wired or optionally wireless.
Combined with the base unit it is a stand-alon solution to monitor the fuel levels in your tanks.
Top mount on tanks
Industry standard SAE-5 stud mounting pattern with gasket seal and washers.
No PC or Software Required
The InfraSensing sensors connect to the base unit (BASE-WIRED). The base unit is a standalone device that has its own IP address in your network. On its own it will monitor the sensor and trigger alerts via email, SNMP or optional SMS when needed.
There is no software or PC required for the sensors to run.
With our optional Monitoring Software you can centrally monitor sensors with trending and more. This is optional and not required.
Wired or Wireless
By default all sensors are connected to the SensorGateway (BASE-WIRED) using a CAT6 or higher RJ45 cable.
Using the optional Wireless Hub & Node modules, any sensor can be turned into a wireless sensor.
Wireless Hub & Nodes
Using the optional Wireless Hub & Node modules, any sensor can be turned into a wireless sensor.
Wireless Hub & Nodes
Customize your sensor: color / enclosure / logo
custom color & logo
Not a fan of orange? Want the sensors to match the color of your mission critical infrastructure equipment? Want to reflect your corporate color? Want to feature your own logo?
custom enclosure
Need the sensors in a custom enclosure to fit your application? Together with our partners, we can help to design special enclosures to meet your requirements.
RS485 (Modbus RTU) version
Looking to integrate this sensor with your own gateway or control system?
This now possible with the RS-485 version of this product. It has the same specs as the normal sensor with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input
This now possible with the RS-485 version of this product. It has the same specs as the normal sensor with following differences:
- RS485 Modbus RTU output
- individually addressable using dial switch
- 256 addresses available
- 12-24v DC input